We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 diverse branches. For far more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Model		SGPM-45II
Capacity/Pressure(m3/min,/BAR)		nine.8/.7	9.7/.eight	7.8/1.	six.5/1.three
Motor	Power(KW)	45
	Pace(r/min)	2980
	Volt(V)	380
	Motor safety grade	IP54
Electrical Supply		380V/50Hz/3Phase(customizable)
Lubricating oil quantity(L)		30
Outlet Temperature(ºC)		≤ ambient Temperature+15ºC
Driven way		Direct Driven
Noise level at 1 meter		68±2dB(A)
Cooled method		Air /Water cooling
Oil content		<3ppm
Outlet Connection		2 “
Dimension	Size(mm)	1900
	Width(mm)	1250
	Peak(mm)	1570
Fat(kg)		1900

Introduction of double phase screw air compressor 
Double stage screw air compressor in the primary elements with double screw,the compression procedure by the fir EPT stage screw and 2nd screw by means of grading sequence compression.
Double screw air compressor in addition to uphold twin-screw compressor has the benefits of easy construction,adaptable installation and higher performance,but also highlights the positive aspects of their possess effective,strength-preserving:
one.can lessen the bearing load,improve volume efficiency,
2.in the case of some load operation,can boost efficlency,vitality saving.
Double screw air compressor than twin-screw compressor energy preserving up to 15%,each and every operate for 8000 hrs a 12 months, Yearly personal savings of about two hundred thousand yuan electric power.
Advantage of two stage screw air compressor 
1. Hierarchical compression to conserve compression work
Via the two-stage series procedure, the unique single-phase compression procedure is divided into two compression processes. These kinds of a method environment can decrease the ratio of every single-stage compression method, which can successfully lessen the compression and compression of every single phase screw. Required travel electrical power.
In the method of best gas compression, the sum of the power necessary for single-stage force transmission and the electrical power required for multi-stage compression is equal, but in the genuine compression process, due to a collection of factors this sort of as the transmission electrical power loss of the coupling, the friction coefficient of the bearing and the viscosity of the coolant With the improve of the used drive, the useless power exceeding the very same ratio is generated, so the ineffective power in the real compression process can be reduced by minimizing the compression ratio of each and every stage, so that the sum of the electrical power essential for multi-stage compression is considerably less than that of one-phase compression Needed electrical power.
2. The intermediate warm oil coo EPT and minimizes the temperature of the fuel moving into the subsequent phase. All the gas compression process is in fact the method of the friction amongst the gas and the shifting components and currently being compressed by it.
In the presence of friction, the fuel will rise in temperature thanks to friction, and there will inevitably be a pattern of shadow accounts. This component of energy will be introduced in the sort of power in the fastened volume of air compression by escalating its personal stress.
The temperature rise of the gasoline boosts the force of the gasoline by itself during the compression approach and raises the compression ratio. Consequently, it is needed to spend extra power to push the gear to shrink the air to the wanted force benefit. As a result, the two-phase screw compressor is presented with a coolant injection curtain device.

Q1: What is the rotor pace for the air conclude?
A1: 2980rmp.

Q2: What’s your lead time?
A2: usually, 5-7 days. ( EPT orders: 15days)

Q3: Can you offer water cooled air compressor?
A3: Yes, we can (typically, air cooled variety).

This autumn: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.

Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Q6: What is your guarantee for air compressor?
A6: One year for the complete air compressor(not including the usage spare components) and technical supports can be offered according to your wants.

Q7: Can you accept EPT orders?
A7: Yes,  EPT orders are warmly welcome.

Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.

Q9: Do you have spare parts in stock?
A9: Yes, we do.

Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.

If you have any questions, make sure you never hesitate to contact us. Thanks!  

 

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For a lot more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique tools manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our company and the outlined replacement components contained herein are not sponsored, accredited, or produced by the OEM.